Error Codes

If your LG Washer is showing error code CS, the machine is reporting a communication or sensor error between internal components — typically between the main control board and a…

If your older LG Washer is showing error code 1E, the machine has detected a water level sensor fault or a water fill failure. Error 1E on older LG Washer…

If your LG Washer is showing error code bE (or BE), the machine has detected that one or more buttons on the control panel are stuck, continuously pressed, or are…

If your LG Washer display is showing rH, the machine is in Rinse Hold mode — the wash cycle has completed but the machine is holding water in the drum…

If your LG Washer is showing error code Sd (or Sud), the machine has detected an excessive amount of suds inside the drum. Error Sd is a suds detection alert…

If your LG top-load Washer is displaying error code dL, the machine has detected that the lid is not locked at the start of a spin cycle. Error dL is…

If your LG Washer is showing error code nE (or NE), the machine has detected abnormal drum noise or excessive vibration during a cycle. Error nE is a noise or…

If your LG Washer is showing error code HS, the machine has detected that the hot and cold water supply hoses may be connected in reverse — hot water is…

If your LG Washer is showing error code FL, the machine has failed to lock the door within the expected time at the start of a cycle. Error FL (Fill…

If your LG Washer display is showing tCL, the machine is prompting you to run a Tub Clean cycle. The tCL notification is not an error code — it is…