If your LG top-load Washer is displaying error code dL, the machine has detected that the lid is not locked at the start of a spin cycle. Error dL is specific to LG top-load washers and means the lid lock mechanism did not engage or confirm a secure lock before the spin began. Here is how to resolve LG Washer error dL.

⚡ Quick Fix – Top 3 Steps

1. Open and close the lid firmly, then press Start. The lid must close completely and activate the lid switch to trigger the lock. Press the lid down firmly until you feel it seat against the machine top. If the lid feels loose or does not close flat, check for debris on the lid rim or around the lid switch striker.
2. Inspect the lid strike and lid lock switch. On LG top-load washers, a small plastic or metal strike on the lid engages with the lid lock switch in the machine body when the lid closes. If the strike is broken or the switch mechanism is worn, the lid cannot activate the lock. Check the strike for cracks and the switch opening for debris or damage.
3. Reset the washer. Press Power Off, wait 1 minute, and press Power On. Select a cycle and press Start. Watch whether the lid lock engages (you will hear a click from the lock mechanism). If it does not click and lock within a few seconds of pressing Start, the lid lock actuator is faulty and needs replacement.

What Does LG Washer Error dL Mean?

Error dL stands for Door Lock error (top-load lid lock). LG top-load washers use an electronic lid lock that activates at the start of the spin cycle as a safety mechanism — the lid is locked to prevent the user from opening it while the drum is spinning at high speed. The lid lock assembly contains a solenoid or wax motor that physically locks the lid and a microswitch that sends a confirmation signal to the control board. If the lock does not engage or the switch does not confirm engagement, the board displays dL and will not proceed with the spin.

Common Causes of LG Washer Error dL

• Lid not fully closed: Laundry or an object is preventing the lid from closing flat.
• Broken lid strike: The plastic or metal lid strike that engages the lock is cracked or worn.
• Faulty lid lock assembly: The electronic lock mechanism has failed and will not engage.
• Damaged wiring to lid lock: A broken wire prevents the lock signal from reaching the control board.
• Debris in the lid lock mechanism: Lint or detergent residue has jammed the lock solenoid or wax motor.

Related LG Washer Errors

• LG Washer Error dE — Door error on front-load LG Washers
• LG Washer Error CL — Child lock active
• LG Washer Error UE — Unbalanced load (spin-related)
• LG Washer Error Codes – Complete Guide