If your older LG Washer is showing error code E2, the machine is reporting that the door is not detected as properly closed or locked at the start of the cycle. Error E2 is the legacy version of the dE door error used on modern LG Washers and has the same meaning and the same fixes. Here is how to resolve LG Washer error E2.

⚡ Quick Fix – Top 3 Steps

1. Close the door firmly and restart. E2 on older LG Washers is most commonly caused by the door not being fully closed. Push the door until you hear or feel a click indicating the latch has engaged, then restart the cycle. Make sure no clothing is caught between the door and the door seal preventing full closure.
2. Inspect the door latch and striker. The plastic door latch (the part that engages the door lock) can wear down or break. Open the door and examine the latch tongue — it should be firm and not cracked. Also check the door lock striker (the part on the machine body that the latch clicks into) for damage or misalignment. If the latch is broken, the door cannot lock and E2 will continue to appear.
3. Check the door lock actuator. The door lock (interlock) on the machine body is an electromechanical component that both locks the door during the cycle and sends a closed signal to the control board. If the lock mechanism is faulty, the board never receives confirmation that the door is secure and displays E2. Test by attempting to open the door immediately after pressing Start — if it opens freely, the lock is not engaging.

What Does LG Washer Error E2 Mean?

Error E2 on older LG Washer models is a door or lid error. It indicates that the door lock mechanism has not confirmed a secure closure to the control board. On modern LG Washers, this same error is displayed as dE. If your machine shows dE, see the guide for LG Washer Error dE.

Common Causes of LG Washer Error E2

• Door not fully closed: Laundry caught in the door prevents the latch from engaging.
• Broken door latch or handle: Physical damage to the latch prevents it from clicking into the lock.
• Faulty door lock actuator: The electric lock mechanism fails to engage or send the locked signal to the board.
• Damaged wiring to door lock: A broken wire or loose connector prevents the locked signal from reaching the control board.
• Warped or misaligned door: The door has shifted slightly out of alignment, preventing the latch from reaching the lock correctly.

Related LG Washer Errors

• LG Washer Error dE — Same door error on modern LG Washer models
• LG Washer Error dE2 — Secondary door error on newer dual-door LG Washers
• LG Washer Error CL — Child lock active
• LG Washer Error Codes – Complete Guide