If your LG Washer is showing error code nE (or NE), the machine has detected abnormal drum noise or excessive vibration during a cycle. Error nE is a noise or vibration detection alert used on certain LG Washer models equipped with vibration sensors. Here is how to diagnose and resolve LG Washer error nE.

⚡ Quick Fix – Top 3 Steps

1. Check that the washer is level on all four feet. Excessive vibration during spin — the most common trigger for nE — is frequently caused by the machine being unlevel. Place a spirit level on top of the machine in both directions and adjust the levelling feet until all four sit firmly on the floor with no rocking. Lock the feet in position by tightening the lock nut on each foot.
2. Redistribute the laundry and reduce the load. Unbalanced or overloaded loads cause the drum to oscillate excessively during spin, generating the vibration and noise that triggers nE. Redistribute the items evenly in the drum, remove excess items if the drum is overfilled, and restart the spin cycle. If nE only appears on large mixed loads, adjust your loading habits.
3. Check that transit bolts have been removed. On newly installed LG Washers, three or four transit bolts secure the drum to the outer casing for shipping. If these have not been removed before use, the drum is rigidly mounted and cannot absorb vibration, causing severe noise and error nE on the first use. Remove all transit bolts (they are typically at the rear of the machine, identified in the installation guide) before running any cycle.

What Does LG Washer Error nE Mean?

Error nE stands for Noise Error on LG Washer models equipped with a vibration or acoustic sensor. The sensor monitors drum movement during operation, and if the vibration or noise exceeds the acceptable threshold — whether due to an unbalanced load, unlevel installation, or a mechanical fault — the board displays nE and pauses or stops the cycle.

Note: nE is not present on all LG Washer models. On models without a vibration sensor, unbalanced loads trigger UE instead. If your model is showing nE, it is specifically equipped with vibration monitoring hardware.

Common Causes of LG Washer Error nE

• Unlevel installation: The machine rocks during spin, amplifying vibration and triggering the noise sensor.
• Unbalanced or overloaded load: Heavy items bunched on one side cause excessive drum oscillation.
• Transit bolts not removed: On new machines, shipping bolts prevent the drum from moving freely.
• Worn suspension springs or shock absorbers: Mechanical damping components are worn and cannot absorb normal spin vibration.
• Foreign object in drum: A coin or button bouncing inside the drum generates noise that can trigger the sensor.
• Worn drum bearings: Severely worn bearings cause grinding noise during spin that activates the noise sensor.

Related LG Washer Errors

• LG Washer Error UE — Unbalanced load error (related to vibration)
• LG Washer Error LE — Motor overload error
• LG Washer Error Codes – Complete Guide