Samsung Washer 5C2 Error Code: Causes and Fixes

Quick answer: On a Samsung Washer, the 5C2 error code means a drain fault has occurred at the end of a spin cycle — specifically, the machine could not drain the remaining water at the final drain stage. Samsung Washer 5C2 is a variation of the main 5C drain error but triggers specifically at the post-spin drainage phase. Causes are identical to the general 5C fault: a clogged drain pump filter, a blocked drain hose, or a failing drain pump.

Quick Fix for Samsung Washer 5C2

• Unplug the Samsung Washer.
• Open the drain filter access panel at the lower front of the machine.
• Use the small emergency drain hose to empty residual water into a shallow tray.
• Unscrew and clean the drain pump filter — rinse under running water to remove lint and debris.
• Inspect the drain hose for kinks and confirm the standpipe height is between 24-35 inches.
• Replace the filter, plug in the washer, and run a rinse+spin cycle to test.

Common Causes of Samsung Washer 5C2

• Clogged drain pump filter: The most common cause — lint, coins, and debris accumulate in the filter and block the pump.
• Kinked or blocked drain hose: The external drain hose is bent or inserted too far into the standpipe.
• Failed drain pump: The pump impeller is broken or the pump motor has failed.
• Blocked standpipe: The household drain standpipe is blocked.
• Siphoning: The drain hose is positioned at an incorrect height, causing water to siphon back.

You got this!

Follow the steps below one at a time — many error codes can be fixed faster than they look.

Related Samsung Washer Drain Error Codes

• Samsung Washer 5C Error Code — main drain fault
• Samsung Washer 5E Error Code — drain fault (older models)
• Samsung Washer nd Error Code — no drain confirmation

Back to Samsung Washer Error Codes

See the complete list at the Samsung Washer Error Codes Complete Guide.