Samsung Washer AE Error Code: Causes and Fixes
Quick answer: On a Samsung Washer, the AE error code means a communication error has been detected between the main control board and the EEPROM (memory chip) or between the main board and a connected module. Samsung Washer AE (also shown as AE or A8) typically occurs after a power disruption or if the control board memory has been corrupted. This is a firmware/communication fault that usually requires a control board reset or replacement.
Quick Fix for Samsung Washer AE
- Unplug the washer for 10 minutes — a longer reset may be needed for EEPROM faults.
- Reconnect and test.
- Check wiring between the main board and any secondary modules.
- If AE persists after multiple resets, the main control board needs professional evaluation.
Common Causes of Samsung Washer AE
- EEPROM corruption: The memory chip on the control board has been corrupted, often after a power surge.
- Main board communication fault: Internal communication between board processors has failed.
- Power surge: Voltage spike has damaged the board’s communication circuitry.
- Loose module connections: A secondary module connection has been disrupted.
You got this!
Follow the steps below one at a time — many error codes can be fixed faster than they look.
Related Samsung Washer Error Codes
Back to Samsung Washer Error Codes
See the complete list at the Samsung Washer Error Codes Complete Guide.
🛠️ Still Not Fixed?
Try these recommended tools — used by thousands to solve the same issue:
Tools & Parts That May Help
As an Amazon Associate / affiliate partner we may earn from qualifying purchases.