Samsung Washer H1 Error Code: Causes and Fixes
Quick answer: On a Samsung Washer, the H1 error code means a temperature sensor fault has been detected. Samsung Washer H1 is a heater or temperature error seen on some Samsung Washer models. H1 is equivalent to the HE heater fault on other models and indicates that the water temperature is not reaching the correct level or the heater circuit is not functioning. The common causes and fixes are the same as HE and HE1.
Quick Fix for Samsung Washer H1
- Run a power reset: unplug for 5 minutes.
- Select a cold wash and test if the machine operates normally.
- If cold wash works but hot wash triggers H1, the heating element or thermistor needs testing.
- Use a multimeter to test the heating element resistance (a working element typically reads 20-40 ohms) and thermistor continuity.
Common Causes of Samsung Washer H1
- Failed heating element: The element has burned out and cannot heat the water.
- Thermistor failure: The temperature sensor is reading incorrectly.
- Heater wiring fault: The wires to the heating element are broken or disconnected.
- Control board fault: The board is not activating the heater correctly.
Related Samsung Washer Error Codes
Back to Samsung Washer Error Codes
See the complete list at the Samsung Washer Error Codes Complete Guide.
🛠️ Still Not Fixed?
Try these recommended tools — used by thousands to solve the same issue:
Tools & Parts That May Help
As an Amazon Associate / affiliate partner we may earn from qualifying purchases.