Browse All:All Appliance Error CodesSamsung Washer Errors

Advertisement
Advertisement

Samsung Washer PF Error Code: Causes and Fixes

Quick answer: On a Samsung Washer, the PF error code means the machine experienced a power failure or power interruption during a cycle. Samsung Washer PF is not a mechanical fault — it is an informational code telling you that a power cut, power surge, or accidental unplugging stopped the cycle before it completed. In most cases, you can resume the cycle or restart it after PF appears.


Advertisement

Quick Fix for Samsung Washer PF

You got this!

Follow the steps below one at a time — many error codes can be fixed faster than they look.

What the Samsung Washer PF Error Code Means

Samsung Washer PF stands for Power Failure. When the Samsung Washer loses power mid-cycle — whether from a utility outage, a tripped circuit breaker, a power surge, or the machine being unplugged — and then power is restored, the machine displays PF to let you know the previous cycle was interrupted.

Samsung Washer PF is different from error codes that indicate a hardware fault. The machine is working correctly — it simply stopped because power was removed and needs direction on whether to resume or start over. However, if PF appears repeatedly without any known power interruptions, it may indicate a problem with the power supply to the machine.

What to Do After Samsung Washer PF

Option 1: Resume the interrupted cycle

Many Samsung Washer models remember the cycle point when power was cut. Press Start/Pause to resume. The machine will continue from approximately where it left off. This is the preferred option if the power interruption was brief and the laundry has not been sitting in water for a long time.

Option 2: Restart the cycle

If the Samsung Washer was early in the wash phase when PF occurred, or if your model does not support resume, simply select the same cycle and press Start. The machine will run the full cycle from the beginning. Laundry that was interrupted early will not be harmed by a restart.

Option 3: Cancel and spin only

If the Samsung Washer was near the end of the cycle when PF occurred and the laundry was already washed and rinsed, run a Spin Only cycle to remove water from the drum without repeating the full wash.

Advertisement

What If PF Keeps Appearing?

If Samsung Washer PF appears repeatedly without an obvious external power failure, investigate the following:

1. Unstable power outlet

Test the outlet the Samsung Washer is plugged into with another appliance. If other appliances also experience interruptions or the outlet feels loose, have an electrician inspect and replace it. A Samsung Washer should be on a dedicated, grounded outlet.

2. Overloaded circuit

If the Samsung Washer shares a circuit with high-draw appliances like a dryer, dishwasher, or refrigerator, the circuit breaker may trip during peak draw — especially during the spin cycle. Move the Samsung Washer to a dedicated circuit to prevent PF from recurring.

3. Power cord damage

Inspect the Samsung Washer power cord from the machine to the wall outlet. Look for cuts, fraying, or areas where the cord is bent sharply. A damaged cord can cause intermittent power drops that appear as repeated PF errors.

4. Internal power supply board issue

If all external power sources are confirmed stable but the Samsung Washer continues to show PF during cycles, the internal power supply board may have a fault causing momentary power drops to the control system. A technician can test and replace this component.

FAQ

Does Samsung Washer PF damage laundry?

No. PF simply means the cycle stopped early. Laundry left in the drum is not harmed as long as it is not left sitting in water for an extended time. Remove wet laundry within a few hours and rewash if necessary.

Can Samsung Washer PF damage the machine?

Occasional PF from utility outages does not damage the Samsung Washer. However, frequent power surges can degrade control board components over time. Consider a surge-protected outlet or power strip for additional protection.

How do I prevent Samsung Washer PF?

Plug the Samsung Washer into a dedicated, properly grounded outlet. Avoid using extension cords. Install a surge protector designed for large appliances. If utility power outages are frequent in your area, a whole-home UPS or surge protection device can prevent PF interruptions.

Conclusion

Samsung Washer PF is a power failure notice, not a hardware fault. After a power interruption, press Start/Pause to resume or restart the cycle. If PF appears repeatedly without a known power cut, check the outlet, circuit, and power cord for instability. Persistent PF without external power issues may indicate an internal power supply board fault requiring professional service.

See all Samsung Washer error codes: Samsung Washer Error Codes – Complete Guide

Advertisement

🛠️ Still Not Fixed?

Try these recommended tools — used by thousands to solve the same issue:

Tools & Parts That May Help

As an Amazon Associate / affiliate partner we may earn from qualifying purchases.

Browse More Fixes

Advertisement
Advertisement
Advertisement
About · Contact · Privacy Policy · Terms · Disclaimer